Security Settings
M160/M161 2-74 SM
Using Auto Erase Memory
The Auto Erase Memory function can be enabled by the following procedure.
1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [
] to display Page 9.
5. Press [Auto Erase Memory Setting].
6. Press [On].
7. Select the method of overwriting.
If you select [NSA] or [DoD], proceed to step 10.
If you select [Random Numbers], proceed to step 8.
8. Enter the number of times that you want to overwrite using the number keys, and then press
[#].
9. Press [OK]. Auto Erase Memory is set.
10. Log out.
11. Check the display and make sure that the overwrite erase icon appears.
12. Check the overwrite erase icon.
The icon [1] is lit when there is temporary data to be overwritten, and blinks during
overwriting.
The icon [2] is lit when there is no temporary data to be overwritten.
To Next Page
Loading...
