Ricoh M160 - Execute the @Remote Settings

Settings for @Remote Service
SM 2-81 M160/M161
Installation
2.21.2 EXECUTE THE @REMOTE SETTINGS
1. Enter the SP mode.
2. Input the Request number which you have obtained from @Remote Center GUI, and
then enter [OK] with SP5816-202.
3. Confirm the Request number, and then click [EXECUTE] with SP5816-203.
4. Check the confirmation result with SP5816-204.
Value Meaning Solution/ Workaround
0 Succeeded -
3
Communication error (proxy
enabled)
Check the network condition.
4
Communication error (proxy
disabled)
Check the network condition.
5
Proxy error (Illegal user name or
password)
Check Proxy user name and password.
6 Communication error Check the network condition.
8 Other error
See "SP5816-208 Error Codes" below
this.
9
Request number confirmation
executing
Processing… Please wait.
11
Request number error (Data is
already registered under this
number.)
Check the request number again.
12
Request number error (invalid
parameter)
Check the request number again.
5. Make sure that the screen displays the Location Information with SP5816-205 only
when it has been input at the Center GUI.
6. Click [EXECUTE] to execute the registration with SP5816-206.
7. Check the registration result with SP5816-207.