and Adjustment
4.9.2 UPPER FUSING UNIT / LOWER FUSING UNIT
1. Fusing Unit (page 4-30 "Fusing Unit")
2. Remove the screws of the fusing unit. ( x5)
When reassembling, be sure to attach the pin [A] to the correct position. If not, the
fusing unit cannot be attached to the main body properly.
3. Separate the fusing unit into the upper and lower fusing units.
4. Right cover [A] (
x2)
[B]: Lower Fusing Unit
[C]: Upper Fusing Unit
To Next Page
Loading...
