Ricoh M160 - Thermistor

Fusing
M160/M161 4-36 SM
4.9.6 THERMISTOR
 The thermistor is integrated with the drawer connector.
1. Separate the fusing unit into the upper and lower fusing units. (page 4-31 "Upper
Fusing Unit / Lower Fusing Unit")
2. Hot Roller (page 4-33 "Fusing Lamp / Hot Roller")
3. Remove the screws of the harness. (
x3)
4. Remove the bracket of the drawer connector, and then remove the screws of the
thermistor. (
x3)
5. Thermistor [A]