and Adjustment
4.12 ELECTRICAL COMPONENTS
Turn off the main power switch and disconnect the power cord before you start any of the
procedures in this section.
4.12.1 FCU BOARD
1. Open the Front cover.
2. Open the Rear cover.
3. Right Cover [A] (
x4, Hook x3)
4. Remove the five screws of the bracket [A] (
x 5), then remove the FCU board [B] with
bracket (
x 1, x 1)
5. Detach the brackets [B] and [C] from the FCU board [A]. (
x3)
To Next Page
Loading...
