and Adjustment
4.13.7 ARDF FRICTION PAD
1. Original Feed Unit (page 4-78 "Original Feed Unit")
2. Release the lever [A] and then detach the ARDF friction pad [B].
4.13.8 ARDF DRIVE MOTOR
1. ARDF Rear Cover (page 4-76 "ARDF Rear Cover")
2. Original Feed Unit (page 4-78 "Original Feed Unit")
3. Push down the lever [A] to the right.
Push up the lever [A] to the initial position when the replacement is finished.
4. Release the hinges arrowed below to detach the upper guide plate [A].
5. Lower Guide Plate [A] (
x5)
To Next Page
Loading...
