Ricoh M160 - Page 239

Capturing Log to SD card
SM 5-19 M160/M161
System
Maintenance
Type Storage Timing Destination (maximum storage capacity)
Engine
debug log
 When an engine SC
occurs
 When paper
feeding/output stop by
jams
 When the machine
doors are opened
during normal
operation
HDD (Up to 300 times)
Operation
panel debug
log
 When a controller SC
occurs
 When saving by
manual operation with
the Number keys and
the Reset key (Press
“Reset”, “0”, "1” and
“C”(hold for 3
seconds))
 When the operation
unit detects an error
 When the operation
panel detects an error
Operation panel (400 MB /Up to 30 times)
When updating the firmware for the operation
panel, the debug logs are erased.
 Debug logs are not saved in the following conditions.
 When there is no optional HDD.
 While erasing all memory
 While data encryption equipment is installed
 While changing the firmware configuration
 Forced power OFF (accidentally disconnecting the outlet)
 Engine debug log in shutdown
 When the power supply to the HDD is off because of energy saving (engine OFF mode
/STR mode)