6.2.8 SC700 (PERIPHERALS)
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC790-00 D
Maximum number of banks (paper tray units) exceeded
When the power is turned ON, the number of mounted paper
tray units is detected and the number exceeds three.
The number of mounted paper tray units exceeds the
specifications.
Reduce the number of mounted paper tray units according to the
specifications.
6.2.9 SC800 (CONTROLLER)
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC816-00 [0x0000] Energy save I/O subsystem error
SC816-01 D Subsystem error
SC816-02 D Sysarch (LPUX_GET_PORT_INFO) error
SC816-03 D Transition to STR was denied.
SC816-04 D Interrupt in kernel communication driver
SC816-05 D Preparation for transition to STR failed.
SC816-07 D Sysarch (LPUX_GET_PORT_INFO) error
SC816-08 D Sysarch (LPUX_ENGINE_TIMERCTRL) error
SC816-09 D Sysarch (LPUX_RETURN_FACTOR_STR) error
SC816-10 D Sysarch (LPUX_GET_PORT_INFO) error
SC816-11 D Sysarch (LPUX_GET_PORT_INFO) error
SC816-12 D Sysarch (LPUX_GET_PORT_INFO) error
SC816-13 D open() error
To Next Page
Loading...
