Service Call
M160/M161 6-38 SM
SC No. Level Error Name/Error Condition/Major Cause/Solution
----
Others
Error in the OS
Others
"init died", "vm_pageout: VM is full", "Cache Error”
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC820-00 D
Self-diagnostics error: CPU
[XXXX]: Detailed error code
[0001] to [06FF]
[0801] to [4005]
CPU error
During the self-diagnosis, the controller CPU detects an error.
There are 47 types of error code (0001 to 4005) depending on
the cause of the error. The CPU detects an error and displays
the specific error code with the program address where the error
occurs.
System firmware problem
Defective controller
1. Turn the main power switch off and on.
2. Reinstall the controller system firmware.
3. Replace the controller.
When the problem cannot be fixed with the above procedure,
the following information displayed on the screen needs to be
reported to the technical support center.
- SC code
- Detailed error code
- Program address
[0701] to [070A]
CPU/Memory Error
System firmware problem
Defective RAM-DIMM
Defective controller
To Next Page
Loading...
