Main Machine Installation
M160/M161 2-6 SM
Password Setting Procedure
For more details about this security issue, see “Notes on Using Multi-Function Printers
Safely” supplied with the MFP.
When Supervisor / Administrator 1-4 passwords are configured via network, the “Change
Supervisor login password” window will not display.
The passwords for Supervisor or Administrator 1 to 4 can be set via “System Settings”.
But the Program/Change Administrator screen appears every time the power switch is
turned ON if the passwords are input this way. So we recommend the customers to set
the passwords via network or the Program/Change Administrator screen.
1. Install the MFP.
2. Turn the main power switch ON.
3. Change the Supervisor login password.
4. Input the password.
5. Press [OK].
To Next Page
Loading...
