Fusing Off Mode
(System settings > Timer Settings > Fusing Unit Off Mode (Energy Saving) On/Off)
Fusing Unit Off Mode (Energy Saving) On/Off
The user can specify whether the machine enters Fusing Unit Off Mode or not.
When the machine is in Fusing Unit Off Mode, the display is on but the fusing unit is off to
save energy.
Default: Off
On
The user can specify when to exit Fusing Unit Off Mode and the time to elapse before
entering Fusing Unit Off Mode.
Off
Turns off Fusing Unit Off Mode.
Exit Fusing Unit Off Mode
The user can specify the condition for the printer to exit Fusing Unit Off Mode.
Default: On Printing
On Printing
The machine exits Fusing Unit Off Mode when printing is performed.
On Operating Control Panel
The machine exits Fusing Unit Off Mode when a key other than the copy function key is
pressed on the control panel of the machine.
If printing is performed with the copy function or a key in the copy function is pressed on
the control panel of the machine, the machine exits Fusing Unit Off Mode regardless of
this setting.
Fusing Unit
Off Mode Timer
Set the time from 10 seconds to 240 minutes, using the number keys.
Default: 10 seconds (10 seconds - 240 minutes)
Return to Stand-by Mode
Sleep Mode
Recovery time: 9 sec.
To Next Page
Loading...
