Main Machine Installation
M160/M161 2-12 SM
Description
Q’ty
-17 -27 -29
Decal - Function (blank) 1 1 1
Decal - FAX: BLIND - 1 -
Decal - SDK: ABS 1 1 1
PLATE:LOGOTYPE:GES:IG - - 1
PLATE:LOGOTYPE:LAN:IG - - 1
PLATE:LOGO:RIC 1 1 1
Starter Toner
Service maintenance model (M161) : 10,400
pages
1 1 1
2.2.4 INSTALLATION PROCEDURE
Removal of packing materials and shipping retainers
When lifting the machine, use the inset grips on both sides. The machine could break or
cause an injury if dropped.
1. Remove the machine from the box, and check the items in the package.
2. Remove the adhesive tape attached on the machine's exterior.
Pull out the paper tray, and then remove the adhesive tape [A] on its side.
To Next Page
Loading...
