Ricoh M160 - Page 476

Main SP Tables-5
SM Appendix 3-63 M160/M161
Appendices:
SP Mode Tables
5-074-093 Application Screen ID C*
[0 to 255 / 0 / 1/step]
Sets the display category of the
application that is specified in the
SP5075-001
5076
[Copy:LT/LG Sizes Setting]
Enables or disables the Copy LT/LG consolidation setting.
5-076-001 0:OFF 1:ON C*
[0 or 1 / 1 / 1/step]
0: Disabled
1: Enabled
5081 [ServiceSP Entery Code Setting] DFU
5-081-001 - C* [ - / - / - ]
5083
[LED Light Switch Setting]
Specifies whether the alert LED is lit or not when toner near end condition
is detected. (This does not change the toner near end condition indication
in the operation panel LCD.)
5-083-001 Toner Near End C*
[0 or 1 / 0 / 1/step]
0: OFF
1: ON
5112
[Non-Std. Paper Sel.]
Selects On/Off to allow the setting of the custom size.
5-112-001 (0:OFF 1:ON) C*
[0 or 1 / 1 / 1/step]
0: OFF
1: ON