IPDS Unit Type M6
M160/M161 2-28 SM
2.6 IPDS UNIT TYPE M6
2.6.1 COMPONENT CHECK
No. Description Q'ty
1 SD Card: IPDS 1
2.6.2 INSTALLATION PROCEDURE
Unplug the main machine power cord before you do the following procedure.
1. Loosen the screw and remove the SD card slot cover at an angle.
2. Insert the SD card (IPDS Unit) in SD slot 1 (upper). Then push it slowly until it clicks.
3. Hook the SD card slot cover onto the opening, attach it flat against the controller board,
and then fasten it using the screw.
4. Plug in the power cord, and then turn on the machine.
5. Print the configuration page to confirm the installation (page 2-17 "Printing a
Configuration Page").
To Next Page
Loading...
