OPTION
System Switch 17 - Not used (Do not change the factory settings.)
System Switch 18 - Not used (Do not change the factory settings.)
System Switch 19 (SP No. 1-101-026)
No Function Comments
3-4 Not used Do not change these settings.
6
Extended scanner page
memory after memory option is
installed
0: Disabled
1: Enabled
0: After installing the memory expansion option,
the scanner page memory is extended to 4 MB
from 2 MB.
1: If this bit is set to 1 after installing the
memory expansion option, the scanner page
memory is extended to 12 MB. But the SAF
memory decreases to 18 MB.
7*
Special Original mode
0: Disabled
1: Enabled
1: If the customer frequently wishes to transmit
a form or letterhead which has a colored or
printed background, change this bit to "1".
"Original 1" and "Original 2" can be selected in
addition to the "Text", "Text/Photo" and "Photo"
modes.
* This setting can be used for the remote machine.
To Next Page
Loading...
