Ricoh M160 - Page 743

Bit Switches - 3
M160/M161 Fax Option 87 SM
M160/M161 FAX
OPTION
Communication Switch 18 (SP No. 1-104-025)
No Function Comments
5
IP-Fax dial-in routing selection
0: Off
1: On
1: Transfers received data to each IP-Fax
dial-in number.
IP-Fax dial-in number is a 4-digit number.
6-7 Not used Do not change these settings.
Communication Switch 1B (SP No. 1-104-028)
No Function Comments
0-7
Extension access code (0 to 7)
to turn V.8 protocol On/Off
0: On
1: Off
If the PABX does not support V.8/V.34 protocol
procedure, set this bit to "1" to disable V.8.
Example: If "0" is the PSTN access code, set
bit 0 to 1. When the machine detects "0" as the
first dialed number, it automatically disables V.8
protocol. (Alternatively, if "3" is the PSTN
access code, set bit 3 to 1.)
Communication Switch 1C (SP No. 1-104-029)
No Function Comments
0-1
Extension access code (8 and
9) to turn V.8 protocol On/Off
0: On
1: Off
Refer to communication switch 1B.
Example: If "8" is the PSTN access code, set
bit 0 to 1. When the machine detects "8" as the
first dialed number, it automatically disables V.8
protocol. (If "9" is the PSTN access code, use
bit 1.)