OPTION
Header Supported Types
Content-Transfer-
Encoding
Base 64, 7-bit, 8-bit, Quoted Printable
2. MIME decoding errors
3. File format not recognized as TIFF-F format
4. Resolution, document size, or compression type cannot be accepted
Remaining SAF capacity error
The machine calls the server but does not receive e-mail if the remaining SAF capacity is less
than a certain value (the value depends on IFAX Switch 08. The e-mail will be received when the
SAF capacity increases (for example, after substitute reception files have been printed). The error
handling method for this type of error is the same as for "Abnormal files".
If the capacity of the SAF memory drops to zero during reception, the machine operates in the
same way as when receiving an abnormal file (refer to "Abnormal files" above).
Secure Internet Reception
To enable password encryption and higher level security: User Tools> System Settings> File
Transfer> POP3/IMAP4 Settings> Encryption (set to "On")
Transfer Request: Request By Mail
For details: Core Technology Manual – Facsimile Processes – Faxing from a PC – Internet/LAN
Fax Boards – Transfer Request
The fields of the e-mail and their contents are as follows:
Field Content
From E-mail address of the requesting terminal
To Destination address (Transfer Station address)
Bcc Blind carbon copy
Subject From TSI (Fax Message No. xxxx)
Content-Type
Multipart/mixed
Text/Plain (for a text part), image/tiff (for attached files)
Content-Transfer-Encoding Base 64, 7-Bit, 8-bit, Quoted Printable
To Next Page
Loading...
