Ricoh M160 - Data Overwrite Security Unit Type I

Data Overwrite Security Unit Type I
SM 2-69 M160/M161
Installation
2.19 DATA OVERWRITE SECURITY UNIT TYPE I
2.19.1 OVERVIEW
This option should be installed only for the customer who requires the CC certified Data
Overwrite Security function.
The function of this option is completely the same as the Data Overwrite Security in Security
Functions, which is standard on this machine.
2.19.2 COMPONENT LIST
Check the quantity and condition of the accessories in the box against the following list.
No. Description Q’ty
1. SD Card 1
2.19.3 BEFORE YOU BEGIN THE PROCEDURE
1. Confirm that the Data Overwrite Security unit SD card is the correct type for the machine. The
correct type for this machine is "Type I".
 If you install any version other than "Type I", you will have to replace the NVRAM
and do this installation procedure again.
2. Make sure that the following settings are not at their factory default values:
 Supervisor login password
 Administrator login name
 Administrator login password
If any of these settings is at a factory default value, tell the customer these settings must be
changed before you do the installation procedure.
3. Make sure that “Machine Management” is on.