Ricoh M199 - Page 122

Service Menu
SM 4-7 M199/M200/M203/M204
System
Maintenance
Reference
At life end: Notice “Replace Now” / Not Stopped
1
At near end: No Notice / Not Stopped
At life end: No Notice / Not Stopped
2 (default)
At near end: Notice / Not Stopped
At life end: Notice “Replace Now” / Not Stopped
3
At near end: Notice “Replace Soon” / Not Stopped
At life end: Notice “Replace Now” / Stopped
Scan Maintenance
Mono
Compression
Sets the monochrome compression type for scanning.
MH (Default)/ MR/ MMR
Registration
Adjust
ADF Main Reg.
Adjusts the ADF Scan main-scan registration.
[-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step]
ADF Sub Reg.
Adjusts the ADF Scan sub-scan registration.
[-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step]
Flatbed Main
Reg.
Adjusts the Flatbed Scan main-scan registration.
[-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step]
Flatbed Sub
Reg.
Adjusts the Flatbed Scan sub-scan registration.
[-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step]
Size Adjust
ADF Main Reg.
Adjusts the ADF Scan main-scan magnification.
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
ADF Sub Reg.
Adjusts the ADF Scan sub-scan magnification.
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
Flatbed Main
Reg.
Adjusts the Flatbed Scan main-scan magnification.
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
Flatbed Sub
Reg.
Adjusts the Flatbed Scan sub-scan magnification.
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
Fax Maintenance