Ricoh M281 Series - Page 691

Main SP Tables-5 (Controller)
SM Appendix 3-51 D255/D256/M281/M282
SP Mode Tables
5-836-128 Reso: Scan(Mono) CTL* [0 to 255 / 3 / 1 / step]
5-836-129 Reso: SDK(Color) CTL* [0 to 255 / 4 / 1 / step]
5-836-130 Reso: SDK(Mono) CTL* [0 to 255 / 3 / 1 / step]
5-836-141 All Addr Info Switch CTL* [0 or 1 / 1 / 1 / step]
5-836-142 Stand-by Doc Max
Number
CTL* [10 to 10000 / 2000 / 1 / step]
5-836-143 ClearLightPDF
Switch
CTL* [0 or 1 / 0 / 1 / step]
5840 [IEEE 802.11]
5-840-006 Channel MAX CTL* [1 to 14 / 14 / 1 / step]
5-840-007 Channel MIN CTL* [1 to 14 / 1 / 1 / step]
5-840-011 WEP Key Select CTL* [0x00 to 0x11 / 0x00 / 1 / step]
5-840-045 WPA Debug Lvl CTL* [1 to 3 / 3 / 1 / step]
5-840-046 11w CTL* [0 to 2 / 0 / 1 / step]
5-840-047 PSK Set Type CTL* [0 or 1 / 0 / 1 / step]
5841
(MP
501/601
only)
[Supply Name Setting]
5-841-001 Toner Name
Setting:Black
CTL* [0 to 0 / 0 / 0 / step]
5842 [GWWS Analysis]
5-842-001 Setting 1 CTL* [0x00 to 0xFF / 0 / 1 / step]
5-842-002 Setting 2 CTL* [0x00 to 0xFF / 0 / 1 / step]