Ricoh M290-27 - 5. Troubleshooting; Service Call Procedures; Interpreting Error Status and LEDs; General Troubleshooting Tips

Select the following items from the Output Check Items list, and switch them on or off.
Items Values
• Main Motor
• Feed Clutch
• Plate Clutch
• Fan High Speed
• Fan Low Speed
• LD Heater On (LD1 & LD2)
• Fuser Heater
• Charge Bias
• Develop Bias
• Trans Current
• Polygon Motor
• LD1 Heate On
• LD2 Heate On
On
Off
• FusingSCReset 0: Execute
Data Upload
Do not use Data Upload settings.
CIS Calibration
Do not use CIS Calibration settings.
Utilities
61