-90
Hardware/System
A forced system reset (WDOG) occurred.
819
D
Fatal kernel error
Due to a control error, a RAM overflow occurred during system processing.
0x5032
HAIC-P2 decompression error
Error occurred in the compression/decompression module of ASIC in HAIC-P2.
•
HDD defective
• System memory defective
• Controller board defective
0x6261
HDD Defective
There is no response from HDD. The power supply to the HDD may have been
interrupted suddenly.
•
Re-format HDD.
• Replace HDD.
554C
USB loader defect
USB loader is detected as defective.
820
D
Self-diagnostic error
0612 Self-diagnostic Error: CPU: ASIC Interrupt Error
• System program defective
•
Controller board defective
• Optional board defective
• Controller firmware defective
833
D
Self-diagnostic error: Engine I/F ASIC
0F30 Device ID for ASIC can not be detected. Register error for ASIC.
6. Troubleshooting
204
To Next Page
Loading...
