5411 006
Detail Option *CTL
Bit 0 Guest Certification
0: OFF (default), 1: ON
Determines whether guest certification is done.
5413 [Lockout Setting]
001 Lockout On/Off *CTL
Switches on/off the lock on the local address book
account.
[0 or 1 / 0 / -]
0: Off, 1: On
002 Lockout Threshold *CTL
Sets a limit on the frequency of lockouts for account
lockouts.
[1 to 10 / 5 / 1/step]
003 Cancel On/Off *CTL
Determines whether the system waits the prescribed
time for input of a correct user ID and password
after an account lockout has occurred.
[0 or 1 / 0 / -]
0: Off (no wait time, lockout not cancelled)
1:
On (system waits, cancels lockout if correct user
ID and password are entered.
004 Cancel Time *CTL
Determines the length of time that the system waits
for correct input of the user ID and password after
a lockout has occurred. This setting is used only if
SP5413-3 is set to "1" (on).
[1 to 999 / 60 / 1 min./step]
5414 [Access Mitigation]
001 Mitigation On/Off *CTL
Switches on/off masking of continuously used IDs
and passwords that are identical.
[0 or 1 / 0 / -]
0: Off, 1: On
002 Mitigation Time *CTL
Sets the length of time for excluding continuous
access for identical user IDs and passwords.
[0 to 60 / 15 / 1 min./step]
Engine SP5-xxx
41
To Next Page
Loading...
