5415 [Password Attack]
001 Permission Number *CTL
Sets the number of attempts to attack the system with
random passwords to gain illegal access to the
system.
[0 to 100 / 30 / 1 attempt/step]
002 Detect Time *CTL
Sets the time limit to stop a password attack once
such an attack has been detected.
[1 to 10 / 5 / 1 sec./step]
5416 [Access Information]
001 User Max Num *CTL
Limits the number of users used by the access
exclusion
and password attack detection functions.
[50 to 200 / 200 / 1 users/step]
002 Password Max Num *CTL
Limits the number of passwords used by the access
exclusion
and password attack detection functions.
[50 to 200 / 200 / 1 password/step]
003 Monitor Interval *CTL
Sets the processing time interval for referencing
user ID and password information.
[1 to 10 / 3 / 1 sec./step]
5417 [Access Attack]
001 Permission Number *CTL
Sets a limit on access attempts when an excessive
number of attempts are detected for printer
features.
[0 to 500 / 100 / 1/step]
002 Attack Detect Time *CTL
Sets the length of time for monitoring the frequency
of access to MFP features.
[10 to 30 / 10 / 1 sec./step]
003 Cert Wait *CTL
Sets the wait time to slow down the speed of
certification when an excessive number of access
attempts have been detected.
[0 to 9 / 3 / 1 sec./step]
3. Appendix: SP Mode Tables
42
To Next Page
Loading...
