To Next PageTo Next PageWhat to do if the wireless LAN board error was detected on Ricoh All in One Printer?
Turn off the power, and then confirm the wireless LAN board is inserted correctly. After confirmation, turn on the power again. If the message appears again, contact your service representative.
What to do if an error has occurred in the hard disk of Ricoh MP C2003 All in One Printer?
Turn off the power, and then back on again. If the message appears again, contact your service representative.
What to do if an error has occurred in the USB interface of Ricoh MP C2003?
Turn off the power, and then back on again. If the message appears again, contact your service representative.
What to do if Ricoh All in One Printer doesn't print documents?
If your Ricoh All in One Printer isn't printing documents, it might be due to a full paper output tray. Remove the prints from the tray. Alternatively, the printer might be out of paper. In this case, load paper into the printer.
Why does my Ricoh All in One Printer frequently misfeed?
Frequent misfeeds in your Ricoh All in One Printer can occur if you're using curled paper. Try to straighten out the curl by hand or load the paper upside down so that the curled edges face downward. Also, the tray's side or end fences may not be set properly. Ensure that the side or end fences are correctly adjusted.
What to do if Ricoh All in One Printer shows an error?
If your Ricoh All in One Printer displays an error, it indicates that a function in the [Check Status] screen has the status "Error Occurred". Press [Check] in the function where the error occurred, then check the displayed message and take appropriate action. You can use other functions normally.
Why does my Ricoh MP C2003 have frequent misfeeds?
Misfeeds can occur frequently in your Ricoh All in One Printer if you are using curled paper, which can also cause soiled paper edges or slipped positions during staple or stack printing. To resolve this: * Straighten out the curl of the paper. * Load the paper upside down, ensuring the curled edges face downward. * Ensure the tray's side or end fences are properly set. If the issue persists, remove the misfed paper and double-check the side or end fences.
What to do if error message remains displayed on Ricoh All in One Printer even if the indicated cover is closed?
If an error message remains displayed on your Ricoh All in One Printer even after closing the indicated cover, it means that one or more covers that are not indicated are still open. Close all the covers of the machine.
What to do if Ricoh MP C2003 cannot connect to the network?
If your Ricoh All in One Printer is unable to connect to the network, ensure the machine is correctly connected and properly set up. If the issue persists, contact your administrator or service representative for assistance.
What to do if error message remains after closing the cover on Ricoh MP C2003?
If an error message remains displayed on your Ricoh All in One Printer even after closing the indicated cover, it means that there are other covers that are not indicated still open. Close all the covers of the machine.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Maximum Paper Size | A3 |
| Copy Resolution | 600 x 600 dpi |
| Duplex Printing | Yes |
| Print Technology | Laser |
| Print Speed | 20 ppm (A4) |
| Scanner Resolution | 600 dpi |
| Network Connectivity | Ethernet |
| Functions | Print, Copy, Scan |
| Operating System Compatibility | Windows, Mac, Linux |
| Scan Speed | 54 images per minute |
| Control Panel | 9-inch color touchscreen |
