Ricoh MP C2504 - Page 1414

2119 [Skew Adjustment Display]
2-119-001 M *ENG [-75 to 75 / 0 / 1pulse/step]
2-119-002 C *ENG [-75 to 75 / 0 / 1pulse/step]
2-119-003 Y *ENG [-99 to 99 / 0 / 1pulse/step]
2120 [Skew Adj Changing Line Speed]
2-120-001 On/Off *ENG [0 or 1 / 0 / 1/step]
2121 [Skew Adjust Coefficient]
2-121-001 Coefficient *ENG [0 to 2 / 0 / 1/step]
2140 [TM/ID Sensor Check Result]
2-140-005 PWM: Front ENG [0 to 1023 / 0 / 1/step]
2-140-006 PWM: Center *ENG [0 to 1023 / 0 / 1/step]
2-140-007 PWM: Rear *ENG [0 to 1023 / 0 / 1/step]
2141 [TM/ID Sensor Check Result]
2-141-005 Average: Front *ENG [0 to 5.5 / 0 / 0.01-V/step]
2-141-006 Average: Center *ENG [0 to 5.5 / 0 / 0.01-V/step]
2-141-007 Average: Rear *ENG [0 to 5.5 / 0 / 0.01-V/step]
2142 [TM/ID Sensor Check Result]
2-142-005 Maximum: Front *ENG [0 to 5.5 / 0 / 0.01-V/step]
2-142-006 Maximum: Center *ENG [0 to 5.5 / 0 / 0.01-V/step]
2-142-007 Maximum: Rear *ENG [0 to 5.5 / 0 / 0.01-V/step]
2143 [TM/ID Sensor Check Result]
2-143-005 Minimum: Front *ENG [0 to 5.5 / 0 / 0.01-V/step]
Engine SP Tables - SP2000-1
179