5751 [Key Event Encryption Setting]
5-751-001 Password CTL [0 to 255 / 0 / 1]
5752 [Copy:WebAPI Setting]
5-752-001 Copy FlairAPI Setting *CTL * see BitSwitch below:
Bit Setting
meanings
Description
0 1
bit 0 Start of FlairAPI
Server
Off
(Do not Start)
On
(Start)
Sets whether to start exclusive
FlairAPI http server. If it is 0,
scanning FlairAPI function and
simple UI function will be
disabled. The machine
installed Android operating
panel option, set “1”, others
set “0”.
bit 1 Access permission of
FlairAPI from outside
of the machine
Disabled Enabled If it is “0”, accessing is limited
from the machine only, such
as operating panel, SDK/J,
MFP browsers etc... If it is “1”,
accessing is allowed from
outside of FlairAPI such as PC,
Remote UI, IT-Box etc...
bit 2 Reserved - - -
bit 3 Reserved - - -
bit 4 Simple UI Function Disabled Enabled If it is “1”, the machine can be
used Scanner Simple UI. If it is
“0”, requesting URL of Simple
UI returns “404 Not Found”
bit 5 Accessing
permission of Simple
UI from outside of
the machine
Disabled Enabled If it is “0”, accessing is limited
from the machine only
(operating panel and MFP
browser). If it is “1”, accessing
is allowed from outside of
Simple UI such as PC, mobile
devices, and so on.
4. Controller SP Mode Tables
640
To Next Page
Loading...
