Staple position:
3 positions
1-staple: 2 positions (Top right-oblique, Top left-oblique)
2-staples: 1 positions (Left)
Staple replenishment: Cartridge (5000 staples)
500-Sheet Finisher
Target Line Speed 77 mm/sec. to 205 mm/sec
Target CPM 35 cpm
Face-down Output Size
12"x18", A3 SEF to A6 SEF, DLT to HLT SEF
Shift sizes: A3 SEF to B5 SEF
A5, B6, A6 SEF labels possible
Paper Thickness
52 g/m
2
(45 K) to 157 g/m
2
(135 K)
Up to 253 g/m
2
(220K) without shift
Stapling
Stack Height for Stapling
50 sheets: A4, LT and smaller
30 sheets: B4, LG and larger
Size A3 SEF to B5 SEF (can be mixed if same width)
Stack Thickness 64g/m
2
(45 K) to 157 g/m (135 K)
Stapling Positions
Front/Oblique: 1, Front/Parallel: 1
Rear/Oblique: 1, Rear/Parallel: 1, 2 locations
Output Tray Capacity
Non-staple Mode 500 sheets: A4, LT and smaller
Staple Mode
250 sheets: B4, LG
and larger
Stack Size (Stapling)
Stacks Size
2 to 9 Sheets 55 to 46
A4, B5, LT LEF
10 to 50 Sheets 45 to 10
1. Appendix: Specifications
30
To Next Page
Loading...
Need help?
General
