EasyManuals Logo

Ricoh MPC 2800 AT-C2 User Manual

Ricoh MPC 2800 AT-C2
856 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #458 background imageLoading...
Page #458 background image
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
861
CTL
D
HDD: Reboot error
The HDD does not become ready within 30 seconds after the power is supplied to
the HDD.
• Loose connection
• Defective cables
• Defective HDD
• Defective controller
1. Check the connection between the HDD and controller.
2. Check and replace the cables.
3. Replace the HDD.
4. Replace the controller.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
863
CTL
D
HDD: Read error
The data stored in the HDD cannot be read correctly.
• Defective HDD
• Defective controller
1. Replace the HDD.
2. Replace the controller.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
864
CTL
D
HDD: CRC error
While reading data from the HDD or storing data in the HDD, data transmission
fails.
• Defective HDD
Replace the HDD.
3. Appendix: Service Call Conditions
102
3

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh MPC 2800 AT-C2 and is the answer not in the manual?

Ricoh MPC 2800 AT-C2 Specifications

General IconGeneral
BrandRicoh
ModelMPC 2800 AT-C2
CategoryAll in One Printer
LanguageEnglish

Related product manuals