SERVICE PROGRAM MODE TABLES 15 February 2006
5-100
5841* Supply Name Setting
Press the User Tools key. These names appear when the user presses the
Inquiry button on the User Tools screen.
001 Toner Name Setting: Black Enter the name of the toner in use.
011 StapleStd1
012 StapleStd2
013 StapleStd3
014 StapleStd4
Standard Staples
021 StapleBind1
022 StapleBind2
023 StapleBind3
Saddle-Stitch Staples
5842* 001 Net File Analysis Mode Setting Bit SW 0011 1111
5842
GWWS Analysis Mode Setting (B246) DFU
This settings select the output mode for debugging information as each network file is
processed.
001 Setting 1
002 Setting 2
5844* USB
001 Transfer Rate
Sets the speed for USB data transmission.
[Full Speed]
[Auto Change]
002 Vendor ID
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000~0xFFFF/1] DFU
003 Product ID
Sets the product ID.
[0x0000~0xFFFF/1] DFU
004 Device Release No.
Sets the device release number of the BCD (binary coded decimal) display.
[0000~9999/1] DFU
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
To Next Page
Loading...
