Ricoh OP-P1 - Page 121

121
OP-P1/MF1 Training
Slide 121
Brief Descriptions of the Technologies
 7. PxP (polymerized) toner
 "PxP toner" is a fine-particle, polyester resin
based toner, manufactured using a Ricoh-original
polymerization method instead of the
conventional pulverization method.
 This allows the toner to fuse at a lower
temperature, which reduces the impact on the
environment and contributes to achieving even
higher image quality than before.
 PxP toner also has other benefits, including a
reduction in the amount of toner needed to
develop the image, as well as an approximate
35% reduction in CO
2
emissions during the toner
manufacturing process.
No additional notes