1
26
Introduction
D3
Flicker Reduction Cuts down on monitor flicker by setting the power frequency.
50Hz
–
Auto Power Off
Sets the time until the camera turns off automatically
if no operations are made for a certain period of time.
1min. p.33
Select Battery
Sets the camera action for when the optional battery grip
is attached to the camera.
Auto Select/
Auto-detect
p.31
Wireless Memory Card
Sets the camera action for when an Eye-Fi card or a Flucard
is used.
–p.86
Reset
Resets the settings of the direct keys and for the items of the A
menu, C menu, B menu, D menu, control panel, and playback
mode palette.
––
D4
Pixel Mapping Maps out and corrects any defective pixels on the sensor. – p.93
Dust Alert
Detects dust adhering to the sensor and visually displays the
location of the dust on the monitor.
–p.93
Dust Removal
Cleans the sensor by applying high-frequency (ultrasonic)
vibrations.
–p.93
Sensor Cleaning
Locks the mirror in the up position for cleaning the sensor with
a blower.
–p.94
Format Formats a memory card. – p.35
Firmware Info/Options
Displays the camera’s firmware version. You can check the
current firmware version before running an update.
––
Menu Item Function Default Setting Page
e_kb570_om.book Page 26 Friday, May 8, 2015 4:55 PM
To Next Page
Loading...
