2
Getting Started
36
4 Set the focus mode switch
to v.
5 Set the mode dial to T
while pressing the mode dial
lock button.
The selected exposure mode
is displayed on the monitor
(Guide Display).
y Guide Display settings
(p.25)
6 Look through the viewfinder
to view the subject.
When using a zoom lens, turn the
zoom ring to the right or left
to change the angle of view.
7 Position the subject inside
the AF frame and press
the shutter release button
halfway.
The focus indicator (P) appears
and you will hear a beep when
the subject comes into focus.
y Setting the Sound Effects
(p.25)
8 Press the shutter release button fully.
The captured image is displayed on the monitor (Instant
Review).
Available operations during Instant Review
To Next Page
Loading...
