2
Getting Started
38
Review the captured image on the monitor.
1 Press 3.
The camera enters playback
mode and the most recently
captured image is displayed
(single image display).
2 Review the captured image.
Available operations
t Memo
• When R is turned to the right to magnify the image, the
magnification is displayed at the bottom right of the screen.
z appears when the image is displayed at the actual pixel
size (1× image display). You can set the initial magnification
when magnifying images in [Quick Zoom] of the B1 menu.
• When Hv is displayed on the monitor, the JPEG
image that was just taken can also be saved in RAW format
(Save RAW Data).
Reviewing Images
C/Q to the left Displays the previous image.
D/Q to the right Displays the next image.
L
Deletes the image.
R to the right Magnifies the image
(up to 16×).
Use ABCD to change the
area to display.
Press M to return the display
area to the center.
Press E to return to the entire
image display.
R to the left Switches to the thumbnail
display (p.68).
d
Switches between the
SD1 card and the SD2 card.
100-0001
H
Saves the RAW data (only
when a JPEG image was taken
and the data remains in the
buffer).
G
Changes the type of
information displayed (p.14).
B
Displays the playback mode
palette (p.67).
e_kb570_om.book Page 38 Friday, May 8, 2015 4:55 PM
To Next Page
Loading...
