Ricoh Pentax K-70 - Page 38

36
1 Set the mode dial to the desired exposure mode.
Q or R appears on the
status screen for the value that
can be changed.
The value that can be changed is
underlined in the viewfinder.
During Live View, D appears for
the value that can be changed.
2 Turn R.
The aperture value is changed in
J, K, L, or M mode.
The sensitivity is changed in H
mode.
3 Turn Q.
The shutter speed is changed in
I, K, or L mode.
1 Set the mode dial to M.
2 Use R to set the
aperture value.
3 To enable the timed exposure, press M, and
then use Q to set the exposure time.
You can set the exposure time within the range from 10" to
20'00".
4 Press 0.
While 0 is pressed, exposure continues.
If the timed exposure is enabled in Step 3, the exposure
ends when the set exposure time elapses after 0 is
fully pressed.
1 /1/
3 030
FF
4.54.5
9 9 9 9 999999
1 0 0100
1/
30
1/
30
F4 .5
F4.5
10 0
100
9999
9999
Bulb Exposure
9 9 9 9 999999
FF
8.08.0
1 6 0 01600