To Next PageTo Next PageWhat to do if my Ricoh PJ KU12000 Projector stops responding?
If your Ricoh Projector stops responding to all controls, turn off the projector if possible, then unplug the power cord and wait at least 60 seconds before reconnecting power.
What to do when the image is stretched when displaying 16:10 DVD title on Ricoh PJ KU12000 Projector?
When you play anamorphic DVD or 16:10 DVD on your Ricoh Projector, the projector will show the best image when the projector display mode is set to 16:9 in the OSD. If you play 4:3 format DVD titles, change the format to 4:3 in the projector OSD. You can also setup the display format as 16:10 (wide) aspect ratio type on your DVD player.
General| Light Source | Laser |
|---|---|
| Technology | DLP |
| Brightness | 12000 lumens |
| Lamp Life | 20, 000 hours |
| Input Terminals | HDMI, DVI-D, VGA, 3G-SDI |
| Output Terminals | VGA |
| Operating Temperature | 5°C - 40°C |
| Resolution | 3840 x 2160 (4K UHD) |
Instructions for setting up the projector and connecting peripherals.
General safety precautions, symbols, and environmental considerations for safe use.
Guidelines for safe management of power cables and connectors to prevent hazards.
Precautions for operating and handling the projector unit itself, including warnings.
Safety measures for accessing or cleaning internal components, warning about high voltage.
Detailed instructions for safe lamp replacement, operation, and potential explosion risks.
Explains the purpose of each button on the projector's integrated control panel.
Details and labels all available ports for connecting external devices and signals.
Explains the function of each button on the projector's remote control.
Guidelines for optimal placement relative to the screen, considering distance and angle.
Step-by-step instructions for installing and removing the projector lens safely.
Diagram showing how to connect PCs, notebooks, and monitors to the projector.
Diagrams for connecting DVD players, cameras, and other video devices.
Describes the sequence for turning on the projector and initial configuration steps.
Step-by-step instructions for safely turning off the projector and its cooling cycle.
Interpretation of LED lights for lamp status, overheating, and operational errors.
Settings for lamp modes, power levels, and automatic switching between lamps.
Steps to resolve common issues like no image, incorrect display, or screen freezing.
Steps for handling unresponsive controls, lamp end-of-life, or popping sounds.
Explains messages related to projector shutdown and component life expectancy.
Detailed steps and crucial safety warnings for lamp replacement.
Instructions for cleaning and replacing the projector's air filters.
Detailed list of the projector's technology, resolution, compatibility, and power consumption.
