Ricoh PJ S2240 User Manual (English)

Questions and Answers:

T
Teresa SimonSep 7, 2025
What to do if the Ricoh Projector image is too small or too large?
- J
  James GloverSep 7, 2025
  If your Ricoh Projector's image is too small or too large, you can try the following: Adjust the Zoom lever on the top of the projector. You can also move the projector closer to or further from the screen. Additionally, you can change the aspect ratio by pressing the “Aspect” button on the remote control or press the “Menu” button on the projector panel, go to “SCREEN > Aspect Ratio” and try the different settings.
G
grobinsonSep 9, 2025
How to fix a Ricoh PJ S2240 Projector image when it is out of focus?
- M
  Michael BarnettSep 9, 2025
  If the image from your Ricoh Projector is out of focus, adjust the Focus Ring on the projector lens. Also, make sure the projection screen is within the required distance.
R
Randy LittleSep 12, 2025
Why is the screen of my Notebook computer not displaying a presentation on the Ricoh PJ S2240 Projector?
- P
  Patrick PaceSep 12, 2025
  If the screen of your Notebook computer isn't displaying a presentation when connected to the Ricoh Projector, it might be because some Notebook PCs deactivate their own screens when a second display device is in use. Refer to your computer’s documentation for detailed information on how to reactivate it.
M
Megan Garcia MDSep 12, 2025
What happens if the Ricoh PJ S2240 Projector lamp burns out or makes a popping sound?
- R
  Rachel PetersonSep 12, 2025
  If the lamp in your Ricoh Projector burns out or makes a popping sound, it means the lamp has reached its end of life. If this happens, the projector will not turn on until the lamp module has been replaced. Follow the procedures in the “Replacing the Lamp” section to replace the lamp.
K
Kelly CookSep 14, 2025
How to fix a stretched image when displaying a 16:9 DVD on the Ricoh PJ S2240?
- A
  Angela LewisSep 14, 2025
  If the image is stretched when displaying a 16:9 DVD on your Ricoh Projector, change the aspect ratio by pressing the “Aspect” button on the remote control or select “SCREEN > Aspect Ratio” from the OSD menu to show the image with the proper aspect ratio.
N
Nicholas RogersSep 16, 2025
What does the temperature error message mean on my Ricoh Projector?
- R
  Rebecca ScottSep 16, 2025
  If your Ricoh Projector shows a temperature error message, it means the projector is overheating inside. Check the environmental conditions to ensure proper ventilation and cooling.

Ricoh PJ S2240 Specifications

General

Weight	2.6 kg
Zoom Ratio	1.1x
Projection System	DLP
Lamp Type	UHP
Image Size	30 - 300 inches
Lamp Life	5000 hours (Eco Mode)
Connectivity	HDMI, VGA, USB, Audio In/Out
Throw Ratio	1.95 - 2.15:1
Keystone Correction	Vertical ±30°
Output Connectors	Audio out
Noise Level	29 dB (Eco Mode)
Operating Temperature	5°C - 35°C
Storage Temperature	-10°C - 60°C