To Next Page
N
Nicholas WilsonSep 7, 2025
Why Ricoh PJ WX3340 Projector power does not turn on?
- AApril BurnsSep 7, 2025
Make sure the power plug or connector of your Ricoh Projector is connected correctly and the lamp cover is mounted correctly.
Why Ricoh PJ WX3340 Projector power does not turn on?
Make sure the power plug or connector of your Ricoh Projector is connected correctly and the lamp cover is mounted correctly.
What to do if Ricoh Projector image is not projected normally?
If the image from your Ricoh Projector is not projected normally, ensure the input signal is compatible with the projector. Check the status of the video tape or other video source. Execute [Auto Set Signals] in [Image Adjustment]. Check the settings of the computer's graphics driver.
How to fix Ricoh PJ WX3340 when 'Fan Error' is displayed?
If your Ricoh Projector displays a 'Fan Error' and turns off, the cooling fan in the projector has likely malfunctioned. Disconnect the power cord and contact your service representative.
What to do if Ricoh Projector operation keys do not respond?
If the operation keys on your Ricoh Projector do not respond, ensure that [Key Lock] in [Default Settings 2] is not set to [On].
What to do if Ricoh PJ WX3340 remote control does not respond?
If the remote control for your Ricoh Projector does not respond, make sure the ID assigned to the remote control and in the settings of [Remote Control ID] in [Default Settings 2] are the same. Ensure the batteries in the remote control are not dead and are correctly loaded. Make sure the remote control is within its effective range, there is nothing between the remote control and the projector, and the remote control receiver is not exposed to strong light.
Why the lamp does not turn off on Ricoh PJ WX3340?
If the lamp does not turn off on your Ricoh Projector, the projector has likely malfunctioned. Disconnect the power cord, wait a while, and then turn the projector on again. If the problem persists, contact your service representative.
General| Resolution | WXGA (1280 x 800) |
|---|---|
| Zoom Ratio | 1.2x |
| Display Technology | DLP |
| Projection Size | 30 - 300 inches |
| Lamp Life | 10, 000 hours (Eco mode) |
| Keystone Correction | Vertical ±30° |
| Video Compatibility | HDMI |
| Connectors (Input) | HDMI, VGA, USB, Composite Video, Audio In |
| Connectors (Output) | VGA, Audio Out |
Details the projector's exterior parts, connection ports, and control panel layout.
Guides on connecting computers, AV equipment, external displays, and speakers to the projector.
Essential safety warnings and guidelines for using the projector to prevent hazards.
Step-by-step guide for turning on the projector and projecting an image from connected sources.
Addresses frequent operational issues like no image, no sound, and connection problems.
Step-by-step instructions for safely replacing the projector lamp unit.
