How to troubleshoot no sound on Ricoh Projector?
To troubleshoot a Ricoh Projector with no sound: * Press the [Input] button. * Ensure the mute function is not turned on. * Check the speaker's volume adjustment. * Make sure the computer or AV equipment is connected correctly. * Confirm the computer or AV equipment is working properly.
How to troubleshoot no image on Ricoh PJ WX4130Ni Projector?
To resolve a Ricoh Projector with no image, try the following: * If [Auto Input Search] is set to [Off], ensure the input signal is correctly switched. * Make sure the mute function is not turned on. * Check the [Brightness] settings in [Image Adjustment]. * Ensure the computer or AV equipment is correctly connected to the projector. * Verify the computer's image output is correctly switched. * Confirm the computer or AV equipment is working properly.
How to fix Ricoh Projector installation error?
If the Ricoh Projector displays "Installation Error" and turns off or doesn't turn on, the projector's angle may be too great. Place the projector at a proper angle and turn it on again.
Why does my Ricoh PJ WX4130Ni show a fan error?
If the Ricoh Projector displays "Fan Error" and turns off, the cooling fan has malfunctioned. Disconnect the power cord and contact your service representative.
What to do if Ricoh PJ WX4130Ni shows hardware error?
If the Ricoh Projector displays "Hardware Error" and turns off, it indicates an internal malfunction. Disconnect the power cord, wait, and then turn the projector on again. If the issue persists, contact your service representative.
What to do if Ricoh PJ WX4130Ni Projector turns off and flashes every second?
If the Ricoh Projector turns off during operation or does not turn on and the interval is flashing every 1 second, the lamp cover may not be installed correctly. Disconnect the power cord and reinstall the lamp cover correctly.
What to do if Ricoh Projector shows temperature error?
If the Ricoh Projector displays "Temperature Error" and turns off, ensure that the intake and exhaust vents are not blocked and that the projector is not being used in a high-temperature environment. Disconnect the power cord, wait, and then turn the projector on again.
Why does my Ricoh Projector lamp turn off?
If the Ricoh Projector lamp turns off or doesn't turn on, it could be due to overheating, expired service life, or a projector malfunction. Try disconnecting the power cord, waiting, and then turning the projector back on. If the lamp is burnt out, replace it.
What to do if my Ricoh Projector doesn't turn on?
If your Ricoh Projector doesn't turn on, it could be malfunctioning. Disconnect the power cord and contact your service representative.
Why no images from USB devices on Ricoh PJ WX4130Ni?
General| Resolution | 1280 x 800 (WXGA) |
|---|---|
| Contrast Ratio | 5000:1 |
| Image Size | 30 - 300 inches |
| Display Technology | DLP |
| Connectivity | HDMI, VGA, USB, LAN |
| Aspect Ratio | 16:10 |
| Video Compatibility | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Speakers | 10W |
| Lamp Type | UHP |
| Keystone Correction | Vertical ±30°, Horizontal ±30° |
| Noise Level | 35 dB (Normal Mode), 28 dB (Eco Mode) |
To Next Page
