Ricoh PJ X4240N User Manual (English)

Other manuals for Ricoh PJ X4240N

Specifications4 pages

Start Guide2 pages

Notes For Users2 pages

Questions and Answers:

J
Jessica WellsSep 7, 2025
How to fix no image on Ricoh Projector?
- L
  Laura GreenSep 7, 2025
  If there is no image on your Ricoh Projector: * Make sure the input signal is switched correctly if [Auto Input Search] in [Default Settings 1] is set to [Off]. * Make sure the mute function is not turned on. * Check the settings of [Brightness] in [Image Adjustment]. * Make sure the computer or AV equipment is connected to the projector correctly. * Make sure the computer's image output is switched correctly. * Make sure the computer or AV equipment is working properly.
P
parkermatthewSep 6, 2025
What to do if my Ricoh PJ X4240N Projector displays 'Temperature Error' and turns off?
- R
  Rebecca FullerSep 6, 2025
  If your Ricoh Projector displays a 'Temperature Error' and turns off, place the projector so that the intake and exhaust vents are not blocked. Then, disconnect the power cord, wait a while, and turn the projector on again.
Q
qmorenoSep 5, 2025
Why does my Ricoh PJ X4240N Projector turn off during use?
- N
  Nicole WarrenSep 5, 2025
  Ensure that the environment where you're using the Ricoh Projector is within the acceptable temperature range and that the vents are not blocked.
D
dayrebeccaAug 23, 2025
What to do if my Ricoh PJ X4240N Projector lamp turns off or doesn't turn on?
- S
  Sarah SilvaAug 23, 2025
  If the lamp in your Ricoh Projector turns off or doesn't turn on, it could be due to overheating, the lamp's service life expiring, or a malfunction. Disconnect the power cord, wait a while, and then turn the projector on again. If the lamp burns out, replace it with a new one.
C
Christopher AdamsSep 3, 2025
Why does my Ricoh Projector not turn on?
- S
  Sheila HughesSep 3, 2025
  If your Ricoh Projector doesn't turn on, it may have malfunctioned. Disconnect the power cord and contact your service representative.
J
Jared WilliamsSep 2, 2025
Why does my Ricoh PJ X4240N Projector power off during use?
- J
  Jacqueline FordSep 2, 2025
  If your Ricoh Projector's power turns off during use: * Ensure the projector is being used within the acceptable temperature range. * Check that the vents are not blocked.
D
Dr. Lisa AriasSep 1, 2025
Why won't the lamp on my Ricoh PJ X4240N turn off and keeps flashing?
- E
  Elizabeth WrightSep 1, 2025
  If the lamp on your Ricoh Projector does not turn off and flashes every 2 seconds, it means that the projector has malfunctioned. Disconnect the power cord, wait a while, and then turn on the projector again. If the problem persists, contact your service representative.
K
Karen GomezAug 31, 2025
How to troubleshoot a Ricoh PJ X4240N Projector when power does not turn on?
- K
  kristen61Aug 31, 2025
  To address the issue of power not turning on for your Ricoh Projector: * Ensure the power plug or connector is correctly connected. * Confirm that the lamp cover is properly mounted.
G
Garrett JeffersonAug 30, 2025
What does 'Fan Error' mean on a Ricoh PJ X4240N Projector?
- D
  Daniel MartinAug 30, 2025
  If the Ricoh Projector displays a "Fan Error" and turns off, the cooling fan has likely malfunctioned. Disconnect the power cord, and contact your service representative.
M
Marilyn AliAug 29, 2025
What to do if Ricoh Projector displays 'Hardware Error'?
- G
  gravesadamAug 29, 2025
  If the Ricoh Projector displays a "Hardware Error" and turns off, it indicates a malfunction. Disconnect the power cord, wait a while, and then turn the projector on again. If the problem persists, contact your service representative.

Ricoh PJ X4240N Specifications

General

Resolution	XGA (1024 x 768)
Display Technology	DLP
Throw Ratio	1.96 - 2.15:1
Image Size	30-300 inches
Speaker	10 W
Brightness	4200 ANSI Lumens
Connectivity	HDMI, VGA, USB
Zoom Ratio	1.1x
Keystone Correction	Horizontal ±30°
Input Terminals	HDMI, VGA, USB
Output Terminals	VGA
Network	Wired LAN
Lamp Life	4, 000 hours (Normal mode), 5, 000 hours (Eco mode)
Projection Lens	F=2.5-2.7, f=22.5-24.75mm
Power Consumption	350W (Normal mode), 280W (Eco mode)
Noise Level	37 dB (Normal mode), 30 dB (Eco mode)