Why is Check Status or Energy Saver key not working on Ricoh Printer?
If nothing happens when you press the [Check Status] key or the [Energy Saver] key on your Ricoh Printer, the power might be turned off. Ensure the main power indicator is off, and then turn on the power.
What to do if Ricoh Printer shows an error?
If an error has occurred on your Ricoh Printer, and the status "Error Occurred" is displayed in the [Check Status] screen, press [Check] in the function where the error occurred. Check the displayed message and take appropriate action. You can still use other functions normally.
How to turn on Ricoh Printer display?
If the display of your Ricoh Printer is turned off, the machine may be in Low Power mode. Touch the display panel or press a key on the control panel to cancel Low Power mode. Alternatively, the machine may be in Sleep mode. Press the [Energy Saver] key or the [Check Status] key to cancel Sleep mode.
What to do if an error message remains displayed even if the indicated cover is closed on Ricoh Pro 8100S All in One Printer?
If an error message remains displayed on your Ricoh All in One Printer even after closing the indicated cover, it means that one or more other covers are still open. Close all the covers of the machine.
What to do if Ricoh Pro 8100S All in One Printer misfeeds frequently?
If your Ricoh All in One Printer frequently misfeeds, it could be due to using curled paper, which can cause misfeeds and soiled edges. Straighten the paper to remove stiffness. Load the paper upside down with curled edges facing downward. Lay cut paper on a flat surface to prevent curling, and do not lean it against the wall.
Why does the error message remain on Ricoh All in One Printer after removing misfed paper?
If an error message persists on your Ricoh All in One Printer after removing misfed paper, it might be because the front cover needs to be fully opened and closed. Do this after removing the jammed paper. Alternatively, paper may still be jammed in the tray.
What to do if an error has occurred on Ricoh All in One Printer?
If an error has occurred on your Ricoh All in One Printer, and a function displays an "Error Occurred" status in the [Check Status] screen, press [Check] for the function with the error. Review the displayed message and take the appropriate action. You can use other functions normally.
Why do misfeeds occur frequently on Ricoh Pro 8100S All in One Printer?
Frequent misfeeds in your Ricoh All in One Printer may be caused by the tray's side or end fences not being set properly. Remove the misfed paper, then check that the side or end fences are correctly set and locked.
Why are documents not printing from my Ricoh All in One Printer?
If documents and reports are not printing from your Ricoh All in One Printer, it might be because the paper output tray is full. Remove the prints from the tray. Alternatively, the printer may be out of paper. In this case, load paper into the printer.
What to do if Ricoh Printer misfeeds frequently?
Frequent misfeeds in your Ricoh Printer can occur due to several reasons. Using curled paper can cause misfeeds, so straighten the paper or load it upside down. Ensure the tray's side or end fences are properly set and locked. Misfeeds may also happen if paper of undetectable size has been loaded or if there's a foreign object on the finisher tray. Lastly, check if the staple cartridge is correctly set.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Hard Drive | 320 GB |
| Connectivity | Ethernet, USB |
| Supported Media Sizes | A4, A5, B5, Letter, Legal |
| Duplex Printing | Yes |
| Paper Weight | 52-300 gsm |
| Memory | 2 GB |
| Operating System Compatibility | Windows, macOS, Linux |
| Weight | 90 kg |
To Next Page
