To Next PageTo Next PageWhat to do if charge potential Vd adjustment error (K) occurs in Ricoh Pro 8100S All in One Printer?
If a charge potential Vd adjustment error (K) occurs with your Ricoh All in One Printer, replace the charger.
What to do if remaining potential Vr detection error (K) occurs in Ricoh Pro 8100S?
If you encounter a remaining potential Vr detection error (K) with your Ricoh All in One Printer, replace the photoconductor unit.
Why is paper bent when it comes out of my Ricoh Printer?
If paper is bent when ejected from the finisher upper tray of your Ricoh Printer, change the output tray to the finisher shift tray.
Why is a function not running or cannot be used on my Ricoh Printer?
If a function on your Ricoh Printer does not run or cannot be used, the machine may be in use by another function. Wait until the current job is completed before trying again. Also, the function cannot be performed while the Address Book is being backed up. Wait a while, and when the Address Book backup is complete, the function will be performed.
Why can't I print in duplex mode on my Ricoh Printer?
You may not be able to print in duplex mode on your Ricoh Printer because you have selected a paper tray that is not set for duplex printing. Change the setting for "Apply Duplex" in [Tray Paper Settings] to enable duplex printing for the paper tray. Alternatively, you may have selected a paper type that cannot be used for duplex printing. In [Tray Paper Settings], select a paper type that can be used for duplex printing.
Why are my documents not printing from my Ricoh Printer?
If documents and reports do not print out from your Ricoh Printer, it might be because the paper output tray is full. Remove the prints from the tray. Alternatively, the printer may be out of paper. In this case, load paper into the printer.
Why does only the Copier icon appear on my Ricoh Printer's home screen?
If, when your Ricoh Printer is turned on, the only icon that appears on the home screen is the [Copier] icon, it indicates that other functions are not yet ready. These functions will appear on the home screen when they are ready for use, and the time required varies by function. Wait a little longer.
What to do if error message persists after closing the cover on Ricoh Printer?
If an error message remains displayed on your Ricoh Printer even after closing the indicated cover, one or more other covers may still be open. Close all the covers of the machine.
Why is Ricoh Printer printing on the wrong side of the paper?
If original images are printed on the reverse side of the paper when using your Ricoh Printer, you may have loaded the paper incorrectly. Load the paper correctly.
What to do if error message remains after removing misfed paper from Ricoh Printer?
If an error message remains on your Ricoh Printer even after removing misfed paper, it could be because the front cover needs to be opened and closed. Also, check if paper is still jammed in the tray. After removing the misfed paper, fully open the front cover and then close it.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Hard Drive | 320 GB |
| Connectivity | Ethernet, USB |
| Supported Media Sizes | A4, A5, B5, Letter, Legal |
| Duplex Printing | Yes |
| Paper Weight | 52-300 gsm |
| Memory | 2 GB |
| Operating System Compatibility | Windows, macOS, Linux |
| Weight | 90 kg |
Implement security measures to protect data and prevent unauthorized access.
Understand the physical parts and their roles in the machine's operation.
Step-by-step guide to making standard copies of documents.
Install printer drivers easily from the provided CD-ROM.
Scan documents and send them directly to a network folder.
Scan documents and send them as email attachments to specified recipients.
Save scanned documents on the machine's hard disk for later retrieval and printing.
Print documents that have been previously saved in the Document Server.
Learn the correct procedures for loading various types of paper into the machine's trays.
Follow safety precautions and procedures for installing new toner cartridges.
Understand status icons indicating machine issues and required actions.
