Ricoh Pro 8300S - Page 322

1.SC Codes
314
Error Condition
A blown fuse is detected on the main controller board.
Major Cause
 Power of downstream unit is off.
 Main controller board is defective.
 Harness is damaged.
 Components are defective
Corresponding components:
 740-60:
1st Transport Motor
1st Vertical Transport Motor
2nd Vertical Transport Motor
 740-61:
3rd Vertical Transport Sensor
Horizontal Transport Motor
 740-62:
1st Blower Fan
1st Lift Motor
2nd Lift Motor
URB/URTB
 740-63:
1st Paper Feed Motor
 740-64:
2nd Paper Feed Motor
 740-65:
2nd Transport Motor
 740-66:
URB/URTB/URRB
 740-67:
All sensors
 740-69:
2nd Blower Fan
1st Lift Motor,
2nd Lift Motor
URB/URTB
 740-70:
1st Pickup Solenoid,
1st Lift Motor