Ricoh Pro 8300S - Perfect Binder: Right Trimming Buffer HP Sensor Late Error; Sc750-44

1.SC Codes
331
Major Cause
 Trimmings buffer motor defective
 Right trimmings buffer HP sensor defective
 Overload
 Connector damaged or defective
 Buffer full of trimmings
Solution
 Reconnect the connector.
 Replace the trimming buffer motor.
 Replace the right trimming buffer HP sensor.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
 Clear the signature jam.
SC750-44
Error Name
Perfect Binder: Right Trimming Buffer HP Sensor Late Error
Pattern
D
Error Condition
The right trimmings buffer HP sensor did not go OFF within 5 sec. after the trimmings buffer moved
toward the sensor.
Major Cause
 Trimmings buffer motor defective
 Right trimmings buffer HP sensor defective
 Overload
 Connector damaged or defective
 Buffer full of trimmings
Solution
 Reconnect the connector.
 Replace the trimming buffer motor.
 Replace the right trimming buffer HP sensor.
 Replace the cutter control board.
 Replace the motor harness.