Ricoh Pro 8300S - Perfect Binder: Press HP Sensor Lag Error; Sc750-50

1.SC Codes
335
Major Cause
 Book buffer tray motor defective
 Book collection buffer tray HP sensor defective
 Overload
 Connector damaged or defective
 Blocked by paper scraps
Solution
 Reconnect the connector.
 Replace the book buffer tray motor.
 Replace the book collection buffer tray HP sensor.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
 Clear the signature jam.
SC750-50
Error Name
Perfect Binder: Press HP Sensor Lag Error
Pattern
D
Error Condition
During press plate operation when trimming, the edge press plate HP sensor does not OFF after it has
moved the prescribed distance.
Major Cause
 Edge press plate motor defective
 Press HP sensor defective
 Overload
 Connector damaged or defective
Solution
 Reconnect the connector.
 Replace the edge press plate motor.
 Replace the press HP sensor.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.