Ricoh Pro 8300S - Perfect Binder: Jog Fence Front HP Sensor Lag Error; Perfect Binder: Jog Fence Large HP Sensor Late Error; Sc751-75; Sc751-76

1.SC Codes
399
Solution
 Reconnect the connector.
 Replace the jog fence front motor.
 Replace the jog fence front HP sensor
 Replace the master control board.
 Replace the motor harness.
 Replace the sensor harness.
SC751-75
Error Name
Perfect Binder: Jog Fence Front HP Sensor Lag Error
Pattern
D
Error Condition
While small-size paper was being jogged, the jog fence front HP sensor did not go OFF after the front
jog fence motor operated long enough for 40 mm of feed.
Major Cause
 Jog fence front HP sensor defective
 Jog fence front motor defective
 Connector loose, broken, defective
Solution
 Reconnect the connector.
 Replace the jog fence front motor.
 Replace the jog fence front HP sensor
 Replace the master control board.
 Replace the motor harness.
 Replace the sensor harness.
SC751-76
Error Name
Perfect Binder: Jog Fence Large HP Sensor Late Error
Pattern
D