Ricoh Pro 8300S - Page 675

2.Image Quality Problems
667
(B) The density is uneven for a certain part of the image.
The leading
edge is fainter.
1. On the Adjustment Settings for Skilled Operators menu, select Machine:
Image Quality > Adjust Image Density > Image Density Adjustment: Manual
Execute. (SP3-011-002: Manual ProCon :Ex Density Adjustment)
2. If the problem persists, perform correction for Fainter Leading Edge. (Fainter
Leading Edge)
The trailing
edge is fainter.
1. On the Adjustment Settings for Skilled Operators menu, select Machine:
Image Quality > Adjust Image Density > Image Density Adjustment: Manual
Execute. (SP3-011-002: Manual ProCon :Ex Density Adjustment)
2. If the problem persists, perform correction for Fainter Trailing Edge. (Fainter
Trailing Edge)
The center is
fainter or denser
1. On the Adjustment Settings for Skilled Operators menu, select Machine:
Image Quality > Adjust Image Density > Image Density Adjustment: Manual
Execute. (SP3-011-002: Manual ProCon :Ex Density Adjustment)
2. If the problem persists, consult the product specialist.
Wavy
unevenness