Ricoh Pro 8300S - Page 692

2.Image Quality Problems
684
No
Use different paper.
3. In Advanced Settings for the custom paper in use, check the setting for Process Speed Adjustment.
4. Is the line speed set at the lowest setting "0" (96 cpm)?.
Yes
Use different paper.
No
Go to the next step.
5. Reduce the line speed setting by 1 step.
6. Print the image. Is the problem resolved?
Yes
Finished.
No
Repeat Steps 4 to 6.
7. If the problem persists after adjusting the process line speed, consult the product specialist.