3.Paper Delivery Problems
707
3. Remove the right front cover of the drawer.
4. Note and record the current setting at .
5. Loosen the screw and move bracket to either the left or the right.
6. If the trimming area pattern [A] is skewed to the rear, move the bracket [B] to the left.
7. If the trimming area pattern [A] is skewed to the front, move the bracket [B] to the right.
8. Print more trimming area patterns and make adjustments until the sides of the trimming area
pattern are perfectly parallel with the edges of the paper.
9. If the problem persists, consult local staff and the product specialist.
Skew Detection Level is Too Low
Increase the skew detection level.
On the Adjustment Settings for Skilled Operators menu, select Machine: Paper Feed/Output > Skew
Detection Level. Reduce the value. (SP1-022-001 to 008: Skew Correction Level Setting
Tray<number>)
To Next Page
Loading...
