Ricoh Pro 8300S - Paper Edges Dirty 1 (Exit Rollers); Paper Edges Dirty 2 (Brushes)

3.Paper Delivery Problems
722
Paper Edges Dirty 1 (Exit Rollers)
Cause:
The exit rollers in the drawer are dirty.
Solution:
Clean the exit rollers in the drawer.
Paper Edges Dirty 2 (Brushes)
Cause:
The antistatic brushes in the exit transport and invert transport of the drawer are dirty or the anti-static
brushes in Finisher SR5110/SR5120 are dirty.
Solution:
Carry out the following sequence of procedures. Terminate the sequence as soon as the problem is
resolved.
Procedure 1
1. Clean the antistatic brushes in the exit transport and inverter transport of the drawer with a blower